Category: Car Radio Installation Guide

AC1464D KIA CERATO/Forte Manual Installation Guide

The AC1464D Kia Cerato/Forte radio’s accessories haven’t the power cable, please use the original power cable to connect the car radio’ plugs.

Firstly, use the Plastic Car Radio Door Clip Panel Trim Dash Audio Removal Pry Tool Repairing Set,  to remove the original car radio.

car radio remove toolThen put our radio in the original place and connect all the cables.

Detailed wire connection diagram is normally on the top of the radio itself. 

This is AC1464D’s radio plug

AC1464D_Radio Plug

 

This is the original car power’s cable. One plug less 2pins, match above plugs less 2pins, then the other power cable match to the other radio’s plug. AC1464D_original cable

Then finish the installation as below picture, then put the air conditioner frame on it. (p.s. below picture haven’t put the air conditioner frame)

AC1464D

Chevrolet Aveo DVD GPS Installation Guide

Chevrolet Aveo DVD GPS Installation Guide

 

Original CD

 Step 1: Take out the upholstey board as pictures shown

 

Step 2: Loosen the 4 screws and then take them out

Step 3: Take out the original car stereo after prize it up, pull out the plugs carefully

4. Connect the wiring harness CAN box which come with the new car dvd player as shown in the pictures. Then prepare for the installation of the new car dvd.

5. Fixing back the upholstery board, and locking screws

6. Prize up the wind letout,and the six buckles out from the original upholstery board, and then install them to the corresponding places on the new car dvd player

 

7. Plug the wiring harness to the corresponding places on the new car dvd player, refer to the picture below

8. Plug the wiring harness of original stereo to the corresponding places on the new car dvd.

9.Install the Car dvd player refer to the picture below

 

 

10. Console-After finished.